W14 Bronchoalveolar Lavage and Protected Specimen Bronchial Brushing
Before Procedure
Anatomy
• Right and left main bronchi are identified, and location of desired BAL specimen is obtained by identification of majority of purulent material or by correlation to side on chest x-ray where greatest infiltrate exists.10
• If there is a question of which lobe is to be sampled, the posterior portion of the right lower lobe should be sampled first. Autopsy studies indicate that pneumonia in intensive care unit (ICU) patients often involve this lobe.16,23–25
Procedure: Bronchoalveolar Lavage
• Obtain informed consent, including process for topical anesthesia of airways and/or conscious sedation.
• Prepare for conscious sedation and monitoring with telemetry monitoring, continuous pulse oximetry, intermittent blood pressure cuff measurement, and supplemental oxygen (via nasal cannula or nonrebreather mask or ventilator).
• Prepare with bronchodilators for patients at risk of bronchospasm, and topicalize airways with 2% lidocaine via atomizer.
• Review chest radiograph to identify ideal location of BAL. Right middle lobe or lingual preferred in supine patient, with also right lower lobe for most direct path of aspiration.
• Anesthetize vocal cords in nonintubated patients and carina in intubated patients with 2% lidocaine (5 mg/kg maximum).
• Obtain sample immediately after wash, watching for return of lavage specimen into collection trap.
• Repeat 20 mL sterile saline wash as necessary to obtain adequate sample (usually 30-50 mL, which is usually 40% to 70% recovery of total instilled volume).
• Fluid return of the BAL can affect the validity of results, and small returns may contain only diluted material from the bronchus rather than the alveoli, resulting in false negatives.12
Procedure: Protected Specimen Bronchial Brushing
• Same as bronchoalveolar lavage except use of an endobronchial catheter wedged in the tracheobronchial tree
• The brush is rubbed against areas of infection and then removed from the procedure port of the bronchoscope.
• The brush is then aseptically cut into a measured volume of sterile diluent (usually 1 mL of sterile saline).7,11
• Double-lumen catheter brush system with distal occluding plug or single-sheathed or telescoping plugged catheter tips7–9